Lenovo 019624U Hardware Maintenance Manual page 59

Removal steps of bottom slot cover
Note: Loosen the screws
When installing: Make sure that all the projections of the cover are attached firmly to the frame. Then
secure the screws.
Applying label to the bottom slot cover
When you replace the cover, following label needs to be peeled off from the old cover, and needs to be
put on the new cover:
1
Asset tag label
For the label location, refer to the following figure:
1
, but do not remove them.
1
1
1
2
1
1
.
Chapter 8 Removing and replacing a FRU
53