Transfer Files To/From Computer; Microsd Card Storage - Ematic TWIG User Manual

4.6 Transfer Files to/from Computer

The device has built in memory and you can easily transfer files to and from the device by
connecting it to a computer.
4.6.1 Connecting to Computer
a. Make sure device is turned on.
b. Connect device to computer using included USB Cable
c. A screen will appear on the device "USB connected"
d. Tap "Turn on USB Storage" to connect device to computer
e. Locate the corresponding drive of the device on your computer and transfer files to this location
4.6.2 Disconnecting from Computer
a. Make sure all files have finished transferring
b. Safely eject the device from your computer using the "Safely Remove Hardware" method. Your
computer should indicate it is now safe to remove hardware
c. Tap "Turn off USB storage" on the device
d. Remove USB Cable from device
4.7 icro SD Card Storage
There is a MicroSD card slot in this device; it supports reading files on MicroSD cards. Ensure
that you insert the card into the card slot, the correct way around. To remove the card, just push the
card towards the slot, and this will automatically release the card. Please adhere to the following
advice when using the card slot:
a. Insert the memory card into the card slot on the right side.
b. Don't pull out the card when it is in use (reading, copying), otherwise, it may cause data errors.
TWIG User's Manual 15