Installation - Zanussi ZCV6602M User Manual

Problem
The residual heat indicators does
not come on
The appliance does not operate
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on
the food and in the oven cavity
If you cannot find a solution to the problem
yourself, contact your dealer or the service cen-
tre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Installation

Warning! Refer to the Safety chapters.
Technical Data
Dimensions
Height
Width
Depth
Oven capacity
Location of the appliance
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
www.zanussi.com
Possible cause
The cooking zone is not hot be-
cause it operated only for a short
time
The fuse in the fuse box is re-
leased
The oven is not switched on
The necessary settings are not set
The oven lamp is defective
You left the dish in the oven for
too long
847 - 867 mm
596 mm
600 mm
69 l
If the cooking zone must be hot,
speak to the after sales service
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
Switch on the oven
Control the settings
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the oven cavity.
.........................................
.........................................
.........................................
Minimum distances
Remedy
B
A
A
21