Installation - AEG BS7304001 User Manual

44 www.aeg.com
The lamp does not oper-
ate.
The display shows an er-
ror code that is not in
this list.
The lamp does not oper-
ate.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

14. INSTALLATION

WARNING!
Refer to the Safety chapters.
The built-in unit must meet the
stability requirements of DIN
68930.
The oven is designed to be connected
to 230 - 240V ~ (50Hz) electricity supply.
The oven has an easily accessible termi-
nal block which is marked as follows:
Connection via
Cooker Control
Circuit
It is necessary that you install a double
pole switch between the oven and the
electricity supply (mains), with a mini-
Problem
Min. size Cable/
flex
2,5 mm²
Possible cause
The lamp is defective.
There is an electrical
fault.
You have selected an
ECO function or Moist
Fan Baking. In these
functions the light can-
not be activated.
on the front frame of the appliance cavi-
ty.
Letter L - Live terminal
Letter N - Neutral terminal
- Earth terminal
The cable used to connect the oven to
the electrical supply must comply to the
specifications given below.
For UK use only
Cable/flex type
PVC / PVC twin
and earth
mum gap of 3 mm between the switch
contacts and of a type suitable for the
Remedy
Replace the lamp.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
the error code again,
contact the Service
Center.
The light cannot be acti-
vated because these
functions help to save
energy.
.........................................
.........................................
.........................................
CAUTION!
This oven must be earthed!
Fuse
min: 15 A
max: 20 A