Technical Data; Machine Settings - Zanussi ZTH 488 User Manual

Technical data

height x width x depth
drum volume
depth with the load door opened
adjustable height
the appliance weight
maximum load volume
voltage
necessary fuse
total power
energy efficiency class
energy consumption kWh/cycle
annual energy consumption
type of use
permitted ambient temperature
1) 8 kg of cotton, centrifuged at 1000 rpm with reference to EN 61121

Machine settings

Setting
BUZZER permanent off
Water hardness
Water contains, a variable
quantity of limestone and miner-
al salts of which quantities vary
according to geographical loca-
tions thus varying its conductivi-
ty values.
Relevant variations of the con-
ductivity of the water compared
to those prefixed by the factory
could slightly influence the re-
sidual humidity of the laundry at
the end of the cycle. Your dryer
allows you to regulate the sen-
sitivity of the drying sensor
based on conductivity values of
the water.
14
1)
1. Turn the programme selector to any programme.
2. Press simultaneously the
CREASE buttons and hold down for approx. 5 seconds.
3. The buzzer is by default always off.
1. Turn the programme selector to any programme.
2. Press simultaneously the
PAUSE buttons and hold down for approx. 5 seconds. The current
setting is on the display:
–
low conductivity <300 micro S/cm
–
medium conductivity 300-600 micro S/cm
–
high conductivity >600 micro S/cm
3. Press the START/PAUSE button sequentially until you set desired
level.
4. To memorize setting press simultaneously the the
CREASE and START/PAUSE buttons or turn knob to O off position
85 x 60 x 58 cm
108 l
109 cm
1.5 cm
55 kg
8 kg
230 -240 V
13
900 W
A
2,15 kWh
121,3 kWh
Domestic
+ 5°C to + 35°C
Implementation
INTENSIVE and
LONG ANTICREASE and START/
LONG ANTI-
LONG ANTI-
www.zanussi.com