Operating Sequence - Zanussi ZDC 46130 S User Manual

125986545.qxp 2007-09-05

Operating sequence

1 Connect the appli-
ance.
2.Open the door.
3. Load the items
one at a time, shak-
ing them out loosely.
4. Close the door.
Please check the
laundry does not get
caught between the
door and filter.
5. Turn the pro-
gramme selector
dial to the required
programme.
10
10:43 Page 10
The light Start/Pause
6. Selecting addi-
starts to flash.
tional functions
The selector dial is
Depending on the
divided into following
programme, different
sections:
functions can be com-
-Cottons bined. These must be
selected after choos-
-Synthetics
ing the desired pro-
-Time
gramme and before
depressing the
Allows you to select
Start/Pause button.
electronically con-
trolled or time con-
7. Select Delicate
trolled drying.
Turn the dial to the
required programme
or time.
Electronically con-
trolled drying (auto-
matic)
The appliance runs
these programmes
Pressing this button
with the help of
allows drying to be
probes which detect
performed at a lower
the degree of damp-
temperature, for deli-
ness of the laundry.
cate items.
Simply select the pro-
The corresponding
gramme according to
pilot light comes on.
the type of laundry
This option can also
and degree of drying
be used for time con-
required.
trolled drying.
At the end of the pro-
DELICATE is only
gramme the selector
suitable for use with
dial must be turned to
loads of up to 3kg!
position O, to switch
the machine off.
When the programme
has finished the pilot
lights End is on.
8. Select the Textile
Press the Textile but-
ton repeatedly, to
select the desired
option. The relevant
light will light up.
You can select 2 dif-
ferent options:
Cotton Cycle: to be
used for cotton,
When the programme
has finished the pilot
lights End is on.
Synthetics to be
used for synthetic or
delicate items.
When the programme
has finished the pilot
lights End is on.