What To Do If - Zanussi ZKI 225 User Manual

What to do if...

IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
checks listed below.
During machine operation it is possible that the red pilot light of button
signals sound and one of the following alarm codes appears on the display to indicate that the
machine is not working:
: problem with the water supply
E10
●
: problem with water draining
E20
●
: door open.
E40
●
Once the problem has been eliminated, press the button
checks, the problem persists, contact your local Service Centre.
Malfunction
The machine does not start:
The machine does not fill:
8
to restart the programme. If after all
Possible Cause / Solution
The door has not been closed.
• Close the door firmly.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse or the fuse in the plug blown.
• Replace the fuse.
The selector dial is not correctly positioned and the
8
button has not been depressed.
• Please turn the selector dial and press the button
again.
10
The button has been selected.
• If the laundry are to be washed immediately, cancel
the delay start
The Child Safety Lock has been activated.
• Deactivate this function.
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose is blocked.
• Clean the water inlet hose filter.
The door is not properly closed.
• Close the door firmly.
8
flashes, a few acoustic
E40
E10
E10
E10
E40
8
21