Oven Lights; Oven Door - Whirlpool RMC275 Use & Care Manual

Electric combination lower oven
Hide thumbs Also See for RMC275:
Table of Contents

Advertisement

Available languages

Available languages

The oven lights are standard 15-watt appliance bulbs. They will
come on when the oven door is opened. They will not work
during the Self-Cleaning
cycle. When the oven door is closed,
press OVEN LIGHT to turn them on or off.
To Replace:
Before replacing, make sure the oven is off and cool.
1. Disconnect
power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise
to remove.
3. Turn bulb counterclockwise
to remove from socket.
4. Replace bulb and bulb cover by turning clockwise.
5. Reconnect power.
4. Lift the oven door while holding both sides.
Continue to push the oven door closed and pull it away from
the oven door frame.
To Replace:
1. Insert both hanger arms into the door.
For normal oven use, it is not suggested to remove the oven door.
However, if removal is necessary, make sure the oven is off and
cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Open oven door all the way.
2. Flip up the hinge latch on each side.
2. Open the oven door.
You should hear a "click" as the door is set into place.
3. Move the hinge levers back to the locked position. Check
that the door is free to open and close. If it is not, repeat the
removal and installation procedures.
3. Close the oven door as far as it will shut.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmc305

Table of Contents