Download  Print this page

Whirlpool GXW7330DXS0 Use & Care Manual page 9

30/36" (76.2/91.4 cm) wall-mount canopy range hood installation instructions
Hide thumbs


Table of Contents
i% S,e
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect
2. Remove terminal box cover.
3. Remove the knockout in the terminal box and install a UL
listed or CSA approved 1/2"strain relief.
4. Run home power supply wiring through 1/2"strain relief into
terminal box.
6. Use UL listed wire connectors
and connect black wires (C)
Electrical Shock Hazard
Electrically ground blower.
Connect ground wire to green and yellow ground wire
in terminal
Failure to do so can result in death or electrical
7. Connect green (or bare) ground wire from home power supply
to the 2 yellow-green
ground wires (D) in terminal box using
UL listed wire connectors.
8. Tighten strain relief screw.
9. Install terminal box cover.
10. Reconnect power.
When using both upper and lower vent covers, push lower
cover down onto hood and lift upper cover to ceiling and
install with two 2.9 x 6.5 mm screws.
NOTE: For vented installations, the upper vent cover may be
reversed to hide slots.
A. UL fisted wire connectors
B. White wires
C. Black wires
D. Green (or bare) wire connected
E. Home power supply
Use UL listed wire connectors
and connect white wires (B)
A. Upper vent cover
B. Lower vent cover
C. 2.9 x 6.5 mm screws
D. Bracket
1. For non-vented (recirculating)
installations only, install
charcoal filters over grille on blower housing. See the "Range
Hood Care" section.
2. Install metal filters. See the "Range Hood Care" section.
3. Check the operation of the range hood blower and light. See
the "Range Hood Use" section.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.

Hide quick links:


Table of Contents

  Also See for Whirlpool GXW7330DXS0

  Related Manuals for Whirlpool GXW7330DXS0

This manual is also suitable for: