Specifications; Wearing Your Headset - Asus Orion Pro Quick Start Manual

Gaming headset
Hide thumbs Also See for Orion Pro:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
4
U7567_Orion_pro.indb 4

Specifications

Driver dimensions:
Ear Cup Diameter:
Impedance:
Frequency response:
PNC (Passive noise
cancellation) performance:
Dimension (mm):
Weight (without cables):

Wearing your headset

There are L and R markings on the ear cups.
• Adjust the headband so it fits snugly on your head.
• Adjust the ear cups so it fits comfortably around your ears.
• Move the volume control to increase/decrease the volume.
Using the Orion headset and its microphone
Connect the microphone and headphone plugs into the respective ports of
your computer or to the ROG Spitfire. Extend the microphone and position
it close to your mouth when in use.
Using your headset with the USB dongle
1. Plug the headset's microphone and output cable to their respective jacks
on the USB dongle.
2. Plug the USB dongle into your computer's USB port. Driver installation is
not required.
3. Go to the Control Panel and audio settings to change the default input /
recording device.
Using Gaming / Surround / Amp modes on the USB
dongle
Press the Gaming / Surround / Amp button on the USB dongle to enable/
disable each audio mode.
50mm with neodymium magnet
100mm
32 ohms+15%
20~20 k Hz
Maximum >30dB
189.85mm (W) x 187.87mm (H) x
103.82mm(D)
268g
Quick Start Guide
6/09/12 16:31:58

Advertisement

Table of Contents
loading

Table of Contents