Table of Contents
Advertisement
SETTINGS
This toggles
the clicking
sound
on the menu and audio
with secondary
video in picture in picture mode for
BD-Video.
* Sebct "Off" when enjoying the high quality sounds of BD
Video.
-(Item
}n, Off
}
You can set the audio output
when connecting
to
SURROUND
equipment.
1
This sets the audio
output
connected
to
SURROUND
equipment.
Ii
Item
DMI Output: Sebct this when you connect using HDMI
OUT terminak
igital Output: Select this when you connect using
DIGITAL AUDK} OUT terminal (OPTK3AL).
ch Audio Output: Sebct this when you do not use
SURROUND sound equipment,
2
You can set the audio
output
mode for each
output
terminal.
(_)
This sets the audio
output
mode for HDMI OUT
terminal
when selecting
"HDMI
Output".
NOTE
* When the secondary audio is set to "On", PCM is
automatically selected as the audio output mode.
Item
Bitstream:
PCM (Surround):
* Select this when connecting to
HDMI equipment with a built in
decoder for DOLBY DIGITAL, etc.
* Setting to Bitstream will output
each audio signal by Bitstream.
* Select this when connecting to
multi channel HDMI equipment.
* Setting to PCM (Surround) will
output by LINEAR PCM by
decoding audio signab recorded in
each audio output mode such as
DOLBY DIGITAL, DTS,
_}
This sets the audio
output
mode for DIGITAL
AUDIO
OUT (OPTICAL
terminal)
when selecting
"Digital
Output".
-
Item
Bitstream:
* Select this when conrlecting to
SURROUND equipment with
a built in decoder for DOLBY
DIGITAL, etc.
• Setting to Bitstream will output
each audio signal by Bitstream.
PCM:
* Select this when connecting to 2
channel stereo audio equipment.
• Setting to PCM will output by
converting each audio signal into
PCM 2 channel audio signal.
NOTE
* See page 62 for information orl output of next gerleratiorl
audio formats.
This lets you adjust the range between
the loudest
and sorest
sounds
(dynamic
range) for playback
at average
volume.
Use this when it is hard to hear
dialog.
-
Item
Normal: The same audio output range is played as the
original recorded audio output range.
Shift*: When Dolby Digital audio is played back, the
dynamic range of the audio is adjusted so that the
dialog portion can be heard easily. (If the audio sounds
abnormal, set to "Normal".)
Auto: When you play back audio in the Dolby TrueHD
format, the dynamic range is automatically adjusted.
Lower the audio volume before setting. If you do not do so,
the speakers may emit a loud sound or excessive output
may be applied to the speakers.
_-
50
Advertisement
Table of Contents
