Table of Contents
Advertisement
Playback Functions
If multiple
angles are recorded,
yet] can switch
between
them.
Press ANGLE
during
playback.
- The display indicates the angle number currently being
played back. Each time you press ANGLE, the angle
switches.
- .... is displayed if a disc is recorded with only one angle.
You can change
settings
so that Angle Mark appears
in the right bottom
part of the screen when multiple
angles are recorded.
The settings
can be changed
in
"Settings"-
"Playback
Setting"-"Angle
Mark Display"
(Page 51).
To return to the previous angle, press ANGLE to cycle
ttTrough the angles until you return to the original angle.
NOTE
- The displayed items vary depending orl the disc.
- If you access the Function Control screen during playback
of a BD/DVD video, it may be impossible to operate the
BD/DVD video playback. In cases like this, close the
Function Control screen.
- The operation of angles differs according to each disc. You
may need to refer to the operation manual of the disc.
- The display for angle information automatically disappears
after 5 seconds.
m
B"
_-
45
Advertisement
Table of Contents
