Sharp BD-HP70U Operation Manual page 30

Hide thumbs Also See for BD-HP70U:
Table of Contents

Advertisement

Video/Picture/Music
Playback
This Player is compatible
with additional
functions
of
BD-Video,
BONUSVIEW
(BD-ROM
Profile 1 Version
1.1) and BD-LIVE.
For BD-Video
discs compatible
with BONUSVIEW,
the
functions
of Picture in Picture and Virtual Package
are
available.
For BD-LIVE compatible
discs, you can enjoy
a variety of functions
via the Internet
in addition
to the
BONUSVIEW
functions.
NOTE
- SHARP cannot guararltee that all brarlds' USB memory
devices will operate with this player.
- Only USB memory devices formatted with FAT 32/16 are
compatible.
When formatting a USB memory device using a PC,
perform tile following settings.
Format Fib System: FAT32
Allocation Unit Size: Default Allocation Size
- Do not use a USB extension cable when connecting a USB
memory device to the USB1 or USB2 terminal of tile player.
- Using a USB extension cable may prevent tile player
from performing correctly.
Virtual Package/BD-LIVE
data is saved in Local
Storage
(USB memory
device connected
to this
Player). To enjoy these functions,
connect
a USB
memory
device
(2GB or greater) supporting
USB 2.0
High Speed (480Mbit/s)
to the USB1 or USB2 terminal
on this player.
- When the wireless LAN adapter is not inserted into the
USB1 terminal on the rear of the player, it is recommended
that the USB memory device be connected to the USB1
terminal. (When you insert or remove a USB memory
device, be sure to turn the main power off and make sure
that "Quick Start" is set to "No" (See page 51).)
NOTE
- A USB memory device can be used with either the USB1
or USB2 terminal. When two USB memory devices are
connected to both terminals at the same time, in certain
situations the USB1 terminal may give priority to Local
Storage and the USB2 terminal cannot be used for Local
Storage.
BD-Video
that includes
secondary
audio and video
compatible
with Picture
in Picture can be played back
with secondary
audio and video simultaneously
as a
small video in the corner.
1
Press
PinP
during
playback
to show
the 2-
picture
screen.
Rear
- if there is insufficient storage space, the data will not be
copied/downloaded.
Delete unneeded data or use a new
USB memory device.
- if a USB memory device containing other data (previously
recorded) is used, the video and audio may not play back
properly.
- if the USB memory device is disconnected from this player
during playback of Virtual Package/BD LIVE data, playback
of the disc will stop.
- Some time may be required for the data to load (read/write).
- Refer to "USB Memory Management" on page 57 for
erasing the Virtual Package data and the BD LIVE data in
the USB memory device.
Primary
Secondary
audio/video
audio/video
2
To remove the secondary video, press PinP
again.
NOTE
- To listen to secondary audio, make sure that "Secondary
Audio" is set to "On". (See page 50.)
- The secondary audio and video for Picture in Picture may
automatically play back and be removed depending on the
content. Also, playable areas may be restricted.
For BD-Video
discs compatible
with Virtual Package,
data is copied
from the discs or Internet to local
storage.
It is automatically
copied
to the local storage
prior to playback.
You can enjoy a variety of additional
functions
including
secondary
video, secondary
audio,
subtitles,
movie trailers,
etc.
- The playback methods vary depending on the disc. For
details, refer to the disc manual.
m
E
(Continued on the next page)
O- 29

Advertisement

Table of Contents
loading

Table of Contents