Recording; Listening Through A Receiver - Samsung Series 8 8000 UN46C8000 User Manual

Series 8 8000
Hide thumbs Also See for Series 8 8000 UN46C8000:
Table of Contents

Advertisement

Advanced Features
Recording
You can make a recording of a TV Program using a Samsung recorder.
1.
Select Recording,
When there are more than two recording devices
* When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
When the recording device is not displayed, select Device List and press the Red button to search devices.
2.
Press the EXIT button to exit.
You can record the source streams by selecting Recording:
(devicename),
Pressing the [_q (REO) button will record whatever you are currently watching, If you are watching video from
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device's users manual.
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the rv Speaker.
1.
Select Receiver and set to On.
2.
Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver, When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
NOTE
You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
The TV remote control may not work under certain conditions, If this occurs, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers' products.
Using the ARC function
You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.
1.
Select Receiver and set to On.
2.
Press the EXIT button to exit.
To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the HDM_
_N2 (ARC} port.
To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the receiver
will be blocked from receiving the signal.
6
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Un46c8000Un55c8000

Table of Contents