Setting up the TV with your PC
Preset: Press the SOURCE button to select PC mode.
Use the Auto Adjust function to have the TV automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and adjusts the frequency values and
_-_ Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
by selecting ToNs _ Auto Adjustment.
This function does not work in DVI-Digital mode.
Coarse I Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is
not removed by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and
Fine-tune again. After the noise has been reduced, readjust the picture so that it is aligned on
the center of screen.
Adjust the PC's screen positioning if it does not fit the TV screen.
Press the A or T button to adjusting the Vertical-Position. Press the 4 or _ button to adjust
You can replace all image settings with the factory default values.