Download  Print this page

Connecting Vhf And Uhf An - SAMSUNG series 8 8500 User Manual

Series 8 8500.
Hide thumbs


Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see 'Antennas with
300 £2Flat Twin Leads' below.
If your antenna has one lead that looks like the diagram to the right, see 'Antennas with 75
Round Leads'.
If you have two antennas, see 'Separate VHF and UHF Antennas'.
Antennas with 300_ FlatTwinLeads
If you are using an off-air antenna (such as a roof antenna or 'rabbit ears') that has 300 :-1twin
flat leads, follow the directions below.
1. Place the wires from the twin leads under the screws on a 300-75 _ adapter (not
supplied). Use a screwdriver to tighten the screws.
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennaswith 75 _ Round Leads
Plugthe antennaleadinto the ANT mN terminal o n the backof the TV.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires an
optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
/ 7
2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.


Table of Contents

   Related Manuals for SAMSUNG series 8 8500

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: