Samsung CFTD2085 Owner's Instructions Manual page 26

03233A(E)-CHAPTER 3 10/30/03 4:04 PM Page 6
TV OPERATION
Changing Channels
Using the Channel Buttons
When you press the CH/', or CH v
buttons, the TV changes channels in
sequence. You will see all the chaimels
that the TV has memorized. (The TV
must have meinorized at least three
channels.) You will not see channels that
were either erased or not memorized.
Directly Accessing Channels
Use the ntJmber buttons to qtlickly tune to any chatme].
Press the number buttons to _ J.
god,iect,ytoa cha,,n ,,
For example, tOselect channel
I
_-.,
27, press "2,'! then !'7,'_The TV ] l_t_ KLj_
wi!l change Channels when ] ff_-_
you press the second number. I '_
When you use the number buttons, you can directly select chaimels that were either erased or
not memorized.
Tel select a channel over ]00, press the +]00 button. (For channel ]22, press "+100," then "2,"
then "2.")
To
change to single<iigit channels (0 9) f_ster, press "0" befLme the
single digit. (For channel "4," press "0," then "4.")
Using the Pre=CH Button to se|ect the Previous Channel
_,1 To quickly switch between
two chart
nels that are f_m apart, tune to one chan-
nel, then use the number button to select
the second chaimel. Then, use the Pre-
CH button to quickly alternate between
them.
3. <)
C}//q>l'E/_
T//],_]7:E; T\ OP/7:/b_J ]{ )]/