Optional Car Cord Adapter - RCA CC6163 User Manual

Thomson
Hide thumbs Also See for CC6163:
Table of Contents

Advertisement

Optional
Car Cord Adapter
The optional DCC08
car cord shown on
page 63 allows you to power your
camcorder
from the cigarette
lighter
socket of a car, truck, or RV. It converts
12-volt to a 6-volt output.
Note: Consult the installation and operating
instructions enclosed with the DCC08 for
complete operating instructions.
Use the DCC08
Car Cord Adapter
Power
To Cigarette
Lighter Socket
Optional
DCC08 Car
Cord Adapter
1.
Set the POWER
switch to OFF to turn
off the camcorder.
The power
indicator
on the camcorder
turns off.
2. If the battery or DC cable is attached
to the camcorder,
remove
it.
3. Hold the bottom of the power
connector
flush against the camcorder,
and press the connector
down until it
locks into place as shown above.
4. Take the vehicle's
cigarette
lighter out
of the socket.
5.
Insert the car cord's cigarette
lighter
plug into the vehicle's
cigarette
lighter
socket.
The power indicator
on the
car cord adapter
lights.
6.
Set the POWER
switch to CAMERA
to
turn on the camcorder.
The power
indicator
on the camcorder
lights.
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents