Setting A Computer Image To The Correct Rgb; Select Mode - RCA Scenium PHD50300 User Manual

High definition plasma display
Hide thumbs Also See for Scenium PHD50300:
Table of Contents

Advertisement

The
Menu
System
Setting
a Computer
Image
to the Correct
RGB
Select Mode
Tile RGB SELECT function
alk)ws
you to select
the correct
viewing
mode
ik)r the type of con_puter
image
you are displaying
The RGB SELECT function has six modes:
AUTO - Automatically
selects the most suitable mode fk_rdisplaying
tile
input signal.
STILL
Use this mode to display VESA standard
signals (still image from a
computer).
MOTION - Use this mode for moving images from a computer.
Converts
the signal to RGB signal for best viewing.
WIDE1- Prevents horizontal
compression
when the input signal is 852 dot
X 480 line signal with a horizontal
frequency
of 31.7kHz.
WIDE2 - Prevents horizontal
compression
when the input signal is 848
dot X 480 line signal with a horizontal
frequency
of 31.0kHz.
I)TV - This mode is primarily used to optimize
picture quality if you are
using a generic brand I)TV receiver which outputs
signal at 4g0P
(progressive
scan) lines.
OPTIONS
AUDIO INPUT
AUDIO1
: VIDEO1
AUDIO2
:" CMPNT1
AUDIO3
: RGB1
BNC SELECT
: RGB2
:4AUTOI_
HD SELECT
: 1080A
PICTURE SIZE
: ON
SEL.
4_ ADJ.
r_I_RETURN
This is the OPTIONS menu with the RGB
SELECT option highlighted.
To change the RGB SELECT mode:
1.
2.
3.
From the main menu, highlight and select the OPTIONS menu. The
OPTIONS menu is displayed.
Highlight the RGB SELECT optkm.
Use the • button to scroll through the mode choices. The settings
switch as follows:
_-_AUTO _" STILL _- MOTION "--_WIDEI"_"
WIDE2 -_ DTV
When
the desired
mode
is selected,
press
the ._ button
to return
to
the OPTIONS
menu
items.
You can continue
making
adjustments
wiflfin the OPTIONS
menu.
press
GO BACK to return
to the previous
menu
or press
('.LEAI_. to exit the menu
system
Chapter
6
39

Advertisement

Table of Contents
loading

Table of Contents