Assembly - ProForm 390 E User Manual
831.239431
Hide thumbs
Also See for 390 E:
- Manual (28 pages) ,
- Manuel de l'utilisateur (28 pages) ,
- User manual (24 pages)
Table of Contents
Advertisement
ASSEMBLY
Assembly requires two persons.
Place all parts of the elliptical in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
in addition
to the included tool(s),
assembly
requires a Phillips screwdriver
_L3======_.
See the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware
kit, check to see if
it has been preassembled.
To avoid damaging
parts, do not use power tools for assembly,
if a part is
missing,
call 1-888-533-1333.
M8 Jam Nut
(77)-4
M8 Washer
(33)-2
M8 x 20mm
Patch Screw
(80)-2
M10 x 48mm Patch
Screw (75)-6
M10 Split
Washer (78)-10
M4 x 16mm
Screw (92)-7
_\\\\\\\\\\\\\\\\\\\t_
M4 x 48mm
Screw (89)-2
M8 x 45mm Button
Bolt (76)-4
M10 x 20mm Patch
Screw (79)-7
M10 x 85mm Patch Screw (82)-4
Shoulder Patch Bolt (31)-2
5
Hide quick links:
Advertisement
Table of Contents
