Table of Contents
Advertisement
The first step in connecting
your TV is obtaining the signal. Your TV 55LA55R120Q
has a back panel, which allows you to receive
analog and/or digital television channels via ANT/CABLE
jack.
Before connecting your TV, determine
using an antenna or a cable service to obtain the signal.
A. Antenna
Connect the antenna to TV via coaxial cable on ANT/CABLE
jack of the back panel. You are ready to receive air local digital and
analog channels.
B. Cable TV service
Connect the cable TV wall jack to TV via coaxial cable on ANT/CABLE
jack of the back panel. You are ready to receive off-air local
digital and analog channels.
C. Set-Top
Box
If you use a set-top box, you may need to call your cable company or satellite service provider, which use a special connection,
please refer to the user's guide of set-top box.
Note: Do not plug the AC cord until you have accomplished
all the connections.
AC
100-120V
60Hz
Cable TV
Antenna
orE]
AC Power Cord
(Connect after all the other connections
are done.)
10
Advertisement
Table of Contents
