Pioneer LaserDisc CLD-D604 Operating Instructions Manual page 9

CONNECTIONS
Connection of additional stereo amplifier
an
This connection scheme shows how to connect the audio output to a stereo amplifier while the video output is connected to a TV using the
scheme shown on page 8.To reproduce the audio of a Compact Disc or an LaserDisc with improved quafity, it is recommended to connect the
player to a stereo amplifier.
Connect the AUDIO OUT jacks to the input jacks labeled LD, CD or AUX, etc. (Never connect to the PHONO input
jacks.)
• Also read the operating instructions of your stereo amplifier.
Plug into a
outlet after
completing all
connections.
Commercially- __
available
audio cord
Commercially-available mini-plug cord (without load)
.immmi i lmm ml=_
Commercially-available '_
• ,. optical cable
Stereo amplifier
CONTROL OUT jack
(PIONEER stereo amp)
• Combination with a PIONEER component with the _ mark
When the player is combined with a component capable of centralized control of PIONEER products carrying the _ mark (optional AV
surround amplifier, etc.), it is possible to control the entire system.
Using a resistorless cord with mini-plugs (without load) on both ends that is available in audio stores, connect the CONTROL IN jack of the
player to the CONTROL OUT jack of the component.
• For the connection and operation methods, read the operating instructions of the component to be connected.
• Once the system remote control connection is made, the remote control sensor of the player will not accept the remote control.
The remote control unit should be pointed at the remote control sensor of the connected component.
9
<VRB1148>