Pioneer LaserDisc CLD-S104 Operating Instructions Manual page 9

Cd cdv ld player
Hide thumbs

Advertisement

lip
iL.
f
PLUG THE POWER
CORDS INTO AN AC OUTLET
Plug the AC power cords of the player, stereo amplifier and TV set into an AC outlet.
When the power cord of this unit is connected to an AC outlet, power is supplied to the unit's
internal memory (such as the last memory) even when the POWER switch is off (STANDBY).
Therefore, be sure to connect the power cord directly to a wall outlet. If the power cord is
connected to an outlet such as a switched outlet on an amplifier, the various memory contents
will be erased whenever the amplifier's power switch is turned off.
%.
J
4mmmm
/
USING
TELEVISION
WITHOUT
AUDIO
AND
VIDEO
JACKS
Optional
RF modulator
mm
mm
VHF
television
antenna
RF antenna
cable
UHF
television
antenna
1. Detach the VHF antenna cable from the VHF antenna
terminal of your TV set, and connect the cable to the
VHF IN terminal of the RF modulator.
2. Connect the VHF OUT terminal of the RF modulator to
the VHF antenna terminal of your TV set.
3. Connect the socket (3-pin) of the RF modulator to the
VHF ADAPTER OUTPUT jacks.
NOTE:
Push the plug in firmly. If the plug is not properly inserted,
it may result in snow or noise on the screen.
When the sound from a LaserDisc or Compact Disc is
output through a television speaker it becomes monaural
50u_6 {,lhis is the same _or a stereo te_evisionl.
NOTES:
Stripepattemsmayapp
earwhenaLaserDiscisplayed
on a television. Move the antenna cable away from the
power cord to avoid this.
Be sure to turn off the power of this player when you
watch a IV broadcast.
fCONNECTING
"IV AND STEREO
AMPLIFIER
Connect the VIDEO OUT jack of the player to the video
input jack of the monitor television.
Connect the AUDIO OUT jacks to the stereo amplifier
AUX, CD, LD, VDP or other jacks, except the PHONO
input jacks. The television speakers can also be used
by connecting the television audio input jacks and the
player AUIDO OUT jacks. However, connection to a
stereo amplifier is recommended
to obtain superior
audio
playback
quality
for Compact
Discs
and
LaserDiscs.
Do not change
the television
antenna
and VCR
connections.
J
STHE
_
MARK
System control can be performed
when the player is
combined with an optional AV amplifier, which can_rovide
centralized control of Pioneer products with the [] mark.
Connect the VIDEO OUT jack of the player to the video
disc video input jack of the AV amplifier and connect the
AUDIO OUT jacks of the player to the audio input jacks of
the AV amplifier.
Connect the CONTROL
IN jack of the player to the
CONTROL
OUT jack of the
AV amplifier
using
a
commercially available cord with mini-plugs.
• For details concerning the connection and operation
methods, please refer to the operating instructions for
the AV amplifier.
J
ATTENUATOR
switch
: CLD-S370/CLD-S304
_1
hen the television speakers are used, the sound may
e distorted. In this case, set the ATTENUATOR switch
o ON (CLD-S370) to reduce the distortion.
.,
NORMAL/KARAOKE
switch
: OLD-S270
o_
hen this switch is set to KARAOKE position, the Aut
ause functions.
AMhC-3 R F OUTPUT
TERMINAL
: CLD-S304
is terminal is for intended for use with AC-3 (Digital
U_li-AUd_O
Format)
components
p\anned
ior
future
release. With this terminal, you will be able to connect
/_C-3
RE err_9\k_\ets
and
sutro_r_
9_oces
-%Ors • a_,d
_31avback
laser discs formatted with Digital Mu_ti-Audio.
• You cannot playback with currently
available laser
discs, laser disc players, AV amplifiers, etc., with this
terminal.
• Do not connect this terminal to the
audio input terminals
ol norma\
stereo
or AV a_r_li{'_ers.
9
<VRB1143>

Hide quick links:

Advertisement

loading

  Related Manuals for Pioneer LaserDisc CLD-S104

This manual is also suitable for:

Laserdisc cld-s370Laserdisc cld-s304Laserdisc cld-s270