Mitsubishi HS-U120 Owner's Manual page 42

Chapter3: OperatingYourVCR Recording (cont.)
_k_rL___----T_._,_ IIII
CH DAY ON OFF
2 MOl? ll:30a I:30pSP!
10 TH20 9:OOp10:OOpEP
..... : : SP
: : SP
O You will see the "recap" screen. Use the ADJUST buttons to
place the cursor next to the program you. wish to cancel.
Press the CANCEL button. The program is erased.
O Press the MENU button once to return t_ the VCR Main
Menu; press it again to t_rn off the menus.
loading a tape for programming
If, after programming, you forget to load a tape, or if you load a
tape with its erasure tab removed, then the programmed record-
ing light and the tape status symbol will flash. A tape without an
erasure tab will be ejected. To correct this, load a tape with its
erasure tab intact, and turn off the VCRo
memon/backup
If the VCR is without power for 30 seconds c r less, it will retain
the time and the programmed settings, provided the VCR has
been plugged in for at least an hour beforehand. If the power is
lost for more than 30 seconds, the time and ':he programmed
settings will be lost.
40