Maintenance; Leveling Legs; Light Replacement - Maytag CRE9900ACB Owner's Manual

MAINTENANCE
Leveling Legs
Some floors are not level. For proper baking,
your range must be level. The leveling legs are
located on each eorner of the base of the range.
Level the range by turning the legs.
( )
WARNING: To reduce the ri:skOfaeeidentaI
tipping of the range, :it m ust _ ieeured bya
ro erly installed anti-tip device Toeheek if the
dmdce is installed_m_rlv, :use: a flashlight and
look underneath tlqerange to See that O_ae o ; the
rear leveling legs is engaged in :t!_e::bracket :s!ot,
The anti-tip device secures the {:rear leveling le
: ::: : : : g
tothe floor, ifpropedyengaged: : :
Light Replacement
Before replacing the light bulb, disconnect the
power to the range. Be sure the bulb is cool.
Do not touch a hot bulb with a damp cloth as the
bulb may, break.
To Replace Panel Light
Grasp the top trim of the backpanel with" your
thumbs under the front edge and pull outward
while lifting to release the trim from the catches
at each end. Remove the bulb and replace it with
an I8 watt fluorescent tube. Snap the top trim
back into place and restore the power. Reset the
eloek to the current time-of-day.
To Replace Oven Light
Ve U carefidly unscrew the lens cover with a dD_
potholder to prevent possible harm to hands,
then very earef!111y remove the bulb with a d U
potholder. Replace with a 40 watt appliance
bulb. Reconnect the power to the range and
reset the clock to the current time-of-day.
PAGE 22