The electronic clock and oven control on your
Maytag wall oven is used for the time-of-day
clock, timer, bake, broil, delay start and self-
clean functions. A beep will sound each time a
function pad is pressed. At the end of an
operation, consecutive beeps will sound.
The display on the control will blink when power
is first supplied
to the wall oven or if there is a
power failure. Once the time-of-day
been set (see Setting the Clock, page 5), the
display _qll stop blinking.
The following pads and knobs are found on your
clock and oven control:
Press this pad to cancel all operations
c!ock and timer. If you are ever
if you've programmed
press the CANCEL
pad and start over.
Turn this knob in either direction
to enter the
time or temperature
This knob is 'also
used to seleet Hi or Lo broil.
The timer can be set from 5 seconds
to 9 hours,
It _ill count down by minutes
set for 1 hour or more time) or seconds
set for less than I hour). See page 5 for
on setting the timer.
Use this pad to set the time-of-day
to do this, see page 5.
You may also press this pad to recall the eurrent
if the timer is
down in the display; press the CLOCK
pad to return
time to the display.
The timer will continue
to count dox_,_aand a
signaJ will sound when the time expires.