Download Print this page

Light Replacement; Oven Door; Fuses (Canadian Wall Ovens Only) - Maytag CWE9000CDE Owner's Manual

Hide thumbs

Advertisement

Light
Replacement
Before replacing
the light bulb, disconnect
the
power
to the wall oven.
Be sure the bulb is
cool. Do not touch a hot bulb with a damp cloth
as the bulb may break.
To Replace
Oven
Light
Very carefully unscrew
the lens cover with a dry
pot holder to prevent
possible
harm to hands,
then very carefully remove the bulb with a dry
pot holder. Replace
with a 40 watt appliance
bulb, Reconnect
the power to the wall oven and
reset the clock to the current
time-of-day,
Oven
Door
Do not place excessive weight on an open oven
door or stand on an open oven door as, in some
cases, it could damage
the door and possibly
injure the user,
When opening
the oven door, allow steam and
hot air to escape before reaching
into the oven to
check, add or remove food.
To Remove
Lift-Off
Door
Open the door to the first stop position
(opened
about 4-6 inches) and grasp the door with both
hands at each side. Do not use the door handIe
to lift the door. Lift up evenly until the door
clears the hinge arms,
CAUTION'.
The hingearms
are spring
mounted
and will slam shut against
the wall
oven ff accidentally
hit. Never
place
your
the front:oven
frame;,
You could be injured
ff
the hinge snaps baek_
To Replace
Door
Grasp the door at each side, align the slots in the
door with the hinge arms and slide the door
down onto the hinge arms until it is completely
seated on the hinges.
Do not attempt
to open or close the door until
the door is completely
seated
on the hinge arms.
Never turn the oven on unless the door is
properly
in ptaee. When ba_ng,
be sure the door
is completely
closed. Your baking results will be
affected if the door is not securely
closed.
Fuses
(Canadian
Ovens
Only)
Your wall oven is equipped with seven (7) type
"P" fuses. The fuses are located in a separate box
which was installed with your wall oven.
If part of your wall oven does not operate, check
to see if a fuse has blown. A gap in the fuse strip
or a darkened
window indicates a blown fuse.
Replace with the same type and amperage
"P"
fUSe.
PAGE 17

Hide quick links:

Advertisement

loading

  Related Manuals for Maytag CWE9000CDE

This manual is also suitable for:

Cwe9000aceCwe9000ddeCwe9000acbCwe9000bceCwe9000bde