Maytag 23-11-2251N-004 Installation Manual page 6

Installing the rear grille into a
new wall sleeve:
A new wall sleeve (sold separately) will ensure the best fit
and performance of your new through-the-wall air
conditioner. See your local dealer or distributor about
purchasing wall sleeve model A70052. To locate a dealer in
your area, call 1-800-332-6658.
Follow the installation instructions that are included with
your new wall sleeve.
If you have a new wall sleeve already installed in the room
with front and rear covers in place, you may complete the
installation by attaching the rear grille.
To Install the rear grille into a new wall sleeve:
1. Remove the front and back covers of the new wall
sleeve. Save the covers for future use to seal the wall
sleeve if the air conditioner is removed.
2. Clean out any debris from inside the wall sleeve, making
sure the inside is clean and that the drain holes are
completely open.
3. Insert the new grille into the wall sleeve. (Fig. 1)
4. Secure the grille to the sleeve with six (6) screws
(provided) through the holes in the grille and into the
sleeve. (Fig. 2)
Warnincj: Install the new grille that came with
your unit or new sleeve. If this rear grille is not
installed in the wall sleeve, your unit will not
operate correctly and the warranty will be void.
Both the air conditioner and the wall sleeve come
with the rear grille. Ifyou have ordered both
items, you may discardthe extra grille.
il
Wall sleeve
Rear grille
m
IE4 View from inside
of room
/
i
# 8-32 self tapping
hillips head screws
(6 pieces)
*Note: Make sure that the word "Top",
stamped into the rear grille, can be read
from inside the room.