Command/Response Table For Sis Commands - Extron electronics MPS 112 User Manual

Programmer's Guide, cont'd

Command/response table for SIS commands

Command
Input selection (in Separate Switcher mode only)
Video and audio
Input selection (in Single Switcher mode only)
Video and audio
Input selection for program audio output (in Separate Switcher mode only)
Program audio
This is the same command as the input selection command for Single and Separate Switcher modes. In Separate
Switcher mode this command has the additional function of switching audio inputs to the program output when
it is entered more than once.
In Separate Switcher mode, selected audio input from one of the three input groups can be routed to the program
audio output. This selected input and group is indicated by a flashing input LED. The LEDs of the two remaining,
unselected groups (inputs) will be steadily on.
To route a different audio input within the same input group to the program audio output, enter the command
* ! . The new input's LED will flash. To route an audio input from a different group to the program audio, enter
X1 X2
the command once if the input is already active and its LED is steadily on, or twice if the input is not active and its
LED is off. The LED for the new input within the new group flashes.
Volume level
Specify volume/variable
Increment volume
Decrement volume
View volume
Mute on
Mute off
View mute status
Mic level
Specify gain
Specify attenuation
View mic volume
Mic on/off
Turn mic on/off
View mic status
Front panel security lockout (executive mode)
Locked
Unlocked
View lock status
Query firmware version
Query firmware version
Request part number
Request part number
5-4 MPS Series • Programmer's Guide
ASCII Command Response
(host to switcher) (switcher to host)
* ! Chn *
X1 X2 X1
! Chn
X11 X11
* ! Chn *
X1 X2 X1 X2
V Vol
+V Vol
-V Vol
V
1Z/z Amt
X3
0Z/z Amt
X3
Z/z
X3
16* G Aud
X4 X5
16* g Aud
X5 X5
16G/g
X5
M/m Mix
X3 X3
M/m
X3
1X/x Exe 1
0X/x Exe 0
X/x
X3
Q/q
N/n 60-532-0X
Additional description
Group and input
X2 X1
selected.
Input is selected.
X11
Group and input
X1
Volume level is
Volume level is
Volume level is
Volume level is
Mute is on.
Mute is off.
Mute status is (0=off and 1=on).
Mic volume is (-66 to +12).
Toggle mic on or off.
Mic status is (0=off and 1=on).
Locks front panel.
Unlocks front panel.
Lock status is (0=off and 1=on).
Firmware version number.
Displays part number of the
MPS 112 or MPS 112CS.
X2 are
.
X2
.
.
.
.