Programming The Remote; Programming Without A Code - Panasonic CT-36HX42 Operating Instructions Manual

REMOTE CONTROL OPERATION (MODELS
CT-32HX42
AND
CT-36HX42),
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers' components, using the component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or
without a code for the component.
Default Modes For Remote Control
eB]TR'_Fj:_ I_TJF_Ir_
TV (Panasonic Only) Panasonic TV Codes
i VCR VCR (Preset) Panasonic VCR Codes
DBS DBS (Preset) Panasonic DBS Codes
CABLE CABLE (Preset) Panasonic DBS Codes
DVD DVD, CD (Preset) Panasonic DVD Codes
Determine the manufacturer of the component and look in the table for the code.
Programming With a Code
Procedure
Confirm that the external component is plugged in and operating,
Turn the component off.
ACTION e • Press Q and together, for at least 5 seconds.
Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.
Enter the 3-digit component code usingthe Remote Control numeric keypad (0 ~ 9 buttons).
• Press the Remote Control O to test the component. If the procedure was successful, the component will turn on.
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple I
codes). I
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming w fa .
Programming Without A Code
This procedure searches all codes and is called the "sequence method."
Confirm that the external component is plugged in and on.
Turn the component off.
ACTION
Press ID and _--_ together, for at least 5 seconds.
v
• Press appropriate component button on the Remote Control.
Press MOL • to move forward to the next code. Press 4 MOL to move backward.
Press the Remote Control _ to test the component. If the procedure was successful, the component will turn on.
v
Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code
is found.
ACTION
After the code is found, press _ to store the code.
25 •