Dell Inspiron One 2310 Intel Service Manual page 21

Service manual
Hide thumbs Also See for Inspiron One 2310 Intel:
Table of Contents

Advertisement

Back to Contents Page
  Wireless Mini-Card(s)
Dell™ Inspiron™ One 2305/2310 Service Manual 
  Removing the Mini-Card(s)
  Replacing the Mini-Card(s)
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 
CAUTION:
When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"
in the safety instructions that shipped with your computer).
NOTE:
Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.
If you ordered a wireless Mini-Card with your computer, the card is already installed.
Your computer supports two half Mini-Card slots for Wireless Local Area Network (WLAN) and a TV tuner module.
 Removing the Mini-Card(s)
 
1. Follow the instructions in
Before You
 
2. Remove the back cover (see
 
3. Follow the instructions from
 
4. Remove the system-board shield (see
 
5. Disconnect the antenna cable(s) from the Mini-Card.
1
antenna cables (2)
 
6. Remove the two screws that secure the Mini-Card to the system-board connector.
 
7. Lift the Mini-Card away from the system-board connector.
 
CAUTION:
When the Mini-Card is not in the computer, store it in protective antistatic packaging (see "Protecting Against Electrostatic Discharge"
in the safety instructions that shipped with your computer).
1
Mini-Card
2
system board connector
3
screws (2)
Begin.
Removing the Back
Cover).
step 2
to
step 5
in
Removing the Front
Removing the System-Board
Stand.
Shield).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron one 2305Inspiron one 2310

Table of Contents