Clearing Forgotten Passwords; Changing Boot Sequence For Future Boots - Dell Inspiron 535S Service Manual

4. At the bottom of the menu, enter the number of the device that is to be used for the current boot only.
For example, if you are booting to a USB memory key, highlight USB Flash Device and press <Enter>.
NOTE: To boot to a USB device, the device must be bootable. To make sure your device is bootable, check the device documentation.

Changing Boot Sequence for Future Boots

1. Enter system setup (see Entering System
2. Use the arrow keys to highlight the Boot Device Configuration menu option and press <Enter> to access the menu.
NOTE: Write down your current boot sequence in case you want to restore it.
3. Press the up- and down-arrow keys to move through the list of devices.
4. Press plus (+) or minus (–) to change the boot priority of device.
Clearing Forgotten Passwords
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
1. Follow the procedures in Before You
2. Remove the computer cover (see
3. Locate the 3-pin password reset jumper on the system board.
NOTE: The location of the password connector may vary depending on the system.
Inspiron 535s/537s
Inspiron 545s
Setup).
Begin.
Removing the Computer Cover).