Table of Contents
Advertisement
Routing theUpperDriveBelt
(TractorModelsEquipped witha 54-inch Deck)
_.-_ j_
oO _
o_
_o
z_,-_
\
_.-
:, .I J .... __'
Spindle Pulley
Keeper Pins
Idler Pulley
Electric PTO Clutch
U dec,"
ge
e
ey
//_perDriveB_
__
(/__
C______-_"
NOTE:
View shown from above tractor.
Figure 16
1.
Route the upper drive belt around the spindle pulley, the pulley found on the idler assembly mounted earlier, the
undercarriage idler pulley and the electric PTO clutch as illustrated in Figure 16. Make sure that the belt is
routed to the INSIDE of all the keeper pins on the spindle pulley.
IMPORTANT: Make certain that the flat side of the belt is facing outward as it sits against both the electric PTO clutch
and spindle pulley. This allows the "V" side of the belt to ride snugly in both pulleys.
11
Hide quick links:
Advertisement
Table of Contents
