Contents Of Hardware Pack; Installing The Battery; Attaching The Steering Tube; Attaching The Side Discharge Chute And Mulching Plug - Yard-Man 13B-325-401 Operator's Manual

Contents of Hardware Pack
INSTALLING THE BATTERY ATTACHING THE STEERING TUBE
_-- _. Down Rods
'_Wing Nut
712-0397
Hex Screw
,j 1/4.20x 125
IA 710-0958
4_--- Hex Ins. L-Nut
1/4-20
7! 2-0324
ATTACHING THE SIDE
DISCHARGE CHUTE (___
AND MULCHING PLUG
_Wing Nut 712-0397/'/'_'(_
Pushnut Fastener j _:_
___ 726-0271 _J
Hex Screws ,, r_l
/
1/4-20 x 2.75 -4_ H
,{ p 710-0564 rl k
r!_-u_.. 1/4-20 x 3.75" [_
710-0825
ATTACHING STEERING SHAFT
Self-Tapping Screw
1/4-20 thd.
710-0599
ATTACHING THE STEERING
WHEEL
_, Hex Screw
_5/16-18 x 1.00
"Lj 710-0643
(_--- Belleville Washer
736-0242
SEAT ASSEMBLY
_.. HexTap. Screw
" ¢_> 3/8-16 x .625
,_ 710-0870
ATTACHING CONTROL KNOBS
Truss Torx Machine (i_ I_
Screw 710-3217
Hex Nut712-0142----_ _)
Control Knobs
731-1918
Figure 2
NOTE: Reference to front, rear, right or left hand side
of the mower is observed from the operating position.
Items Required For Assembly
1. Fresh Gasoline
2+ 7/16" wrench or socket (2)
3. 1/2" socket (1)
4. 9/16" wrench or socket (1)
5, Phillips head screwdriver (1)
6. Flat head screwdriver (1)
IMPORTANT: Thssunit is shipped WITHOUT
GASOLINE in the engine, Be certain to service
engine with gasoline as instructed in the separate
engine manual before operating your mower.
All hardware necessary for assembling your
rider mower is included in the hardware pack.
See Figure 2 and get familiar with the
hardware before starting to assemble unit.
7