Miele ESW4720 Operating Instructions Manual page 24

Jnstaffation
Installation tips
- The warming drawer should be
placed at a convenient height for
easy access,
- The drawer should be installed clear
of drafts caused by open doors and
windows,
- Proper clearance must be allowed
for the warming drawer to open with
out interference,
- The warming drawer must be
secured to cabinetry to prevent the
drawer from tipping when loaded,
- The warming drawer should be level
to prevent the drawer from sliding
open or closing on its own,
The drawer can not be leveled after it
has been installed.
If necessary install a shelf within the
cabinetry to support the drawer.
I_,, IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII!i
Steam from the vents can damage J
the cabinetry surrounding the
warming drawer,
Solo installation:
A minimum gap of 2" (5 cm) must be
present between the upper edge of !:
the warming drawer and the
cabinetry, I
instaJlation in combination with an
Oven:
A minimum gap of !" (2.5 ore) must
be present between the upper edge
of the warming drawer and the oven,
This gap should be sealed with a
moisture resistant sealing material,
24