Dell 1909Wb User Manual page 67

Dell 1909W Flat Panel Monitor User's Guide
Automatic Adjust /Adjust
Up
C
Input Source
Select/Adjust Down
D
Menu
E
Power
(with power light
indicator)
file:///T|/htdocs/monitors/1909W/en/ug/operate.htm[11/8/2012 2:54:10 PM]
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune
your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
Use this button to select the input source or to decrease the values of the selected menu option. Use the Input source button to
select one of the two different video signals that may be connected to your monitor:
VGA input
DVI-D input
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below
appears.
Use the MENU button to launch the on-screen display (OSD) and select the OSD Menu. See
Use the Power button to turn the monitor on and off.
The Blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
or
or
or
Accessing the Menu System.