Setting Up The Monitor; Attaching The Stand; Connecting Your Monitor - Dell 1909Wb User Manual

Dell 1909W Flat Panel Monitor User's Guide
Back to Contents Page

Setting Up the Monitor

Dell™ 1909W Flat Panel Monitor User's Guide

Attaching the Stand

Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Removing the Stand
Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
NOTE: This is applicable for a monitor with a stand. When the OptiPlex
guide for set up instructions.
To attach the monitor stand:
1. Place the stand on a flat surface
2. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
3. Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand.

Connecting Your Monitor

file:///T|/htdocs/monitors/1909W/en/ug/setup.htm[11/8/2012 2:53:45 PM]
TM TM
USFF 780/ OptiPlex SFF 980 AIO stand is bought, please refer to the respective AIO stand setup