Table of Contents
Advertisement
Switching the tuner's pitch indication
You can select # or for a pitch indicated on the tuner screen.
1.
While the system setting screen is displayed, press the [+] or [–] button to select
"tUnEr" from the system setting menu items, then press the [
2.
Press the [+] or [–] buttons to select "SHrP" (#) or "FLAt" ( ), then press the
[
] (Play) button.
Press the [■] (Stop) button to return to the HOME screen.
Displaying the firmware version
While the system setting screen is displayed, use the [+] or [–] button to select "VEr"
from the system setting menu items.
NOTE
Visit the Yamaha Pro Audio website for the latest information on the firmware.
http://www.yamahaproaudio.com/pr7/
Press the [■] (Stop) button to return to the HOME screen.
Error Messages
Unit status or function
] (Play) button.
Built-in memory error
microSD card error
Low battery
No file
No microSD card
File full
Built-in memory full
microSD card full
Slow in recording into a
microSD card
File format error during
overdubbing
File is too short.
Dividing position error.
The [FILE] button was
Version information
pressed while the MUSIC
(This indication
folder was selected.
means version 1.00.)
File deletion error
Marker addition error
Recording level setting
disabled error
Recording level was over
38
Error
Action
Messages
Initialize the built-in memory
(page
➙ Power on while pressing and holding down [REC SET] >
Int Error
"ForMAt" > "Int" > "y" (Yes)
(page
➙ If the error persists after initialization, the unit may be
malfunctioning.
Re-insert the card
(page
7) or format the card
➙ Power on while pressing and holding down [REC SET] >
Sd Error
"ForMAt" > "Sd" > "y" (Yes)
(page
➙ If the error persists after formatting, the unit or the
microSD card may be malfunctioning.
Lo bAt
Replace the battery with a new one
no FILE
Select a folder that contains a file
no SD
Insert a microSD card
(page
7).
Select a folder that contains fewer than 99 files
FILE FULL
delete unnecessary files from the folder
Delete unnecessary files from the built-in memory
Int FULL
(page
30), copy files to a microSD card
files to a computer
(page
33).
Delete unnecessary files from the microSD card
Sd FULL
or move files to a computer
(page
Select a lower-quality recording format
the microSD card
(page
36).
➙ Power on while pressing and holding down [REC SET] >
REC Error
"ForMAt" > "Sd" > "y" (Yes)
(page
➙ If the error persists after formatting, the microSD card may
be malfunctioning.
Select a file in the format that is supported for recording
dUb Error
(page
11).
Select a file that is longer than two seconds
Set the dividing position to anywhere in the middle. Avoid the
Edit Error
start or end of the file
(page
22).
Select the REC folder
(page
27).
From the connected computer, de-select "Read only" in the
dEL Error
file's property panel, and cancel write-protection for the
microSD card.
Position the marker away from the closest markers by two
Add Error
seconds or more
(page
17).
ALC On
Set the type of dynamics control to "OFF" or "LIM"
Set the recording level lower
(page
PEAK
Dynamics control
(page
14)
Error Messages
36).
35)
(page
36).
35)
(page
7).
(page
11).
(page
11), or
(page
30).
(page
33), or move
(page
30),
33).
(page
11) or format
35)
(page
29).
(page
14).
9)
Reference Manual
Advertisement
Table of Contents
