03
Connecting a USB device
It is possible to play audio and photo files by connecting USB devices to this receiver.
iPod iPhone iPad
DIRECT CONTROL
with USB
%
Switch the receiver into standby then connect your USB device to the USB terminal on the
front panel of this receiver.
! This receiver does not support a USB hub.
! For instructions on playing the USB device, see
Connecting an MHL-compatible device
An MHL-compatible mobile device can be connected to enjoy 3D/Full-HD videos, high quality multi-channel
audio, and photos etc., with charge the battery on the receiver. Use the MHL cable to connect the device.
iPod iPhone iPad
DIRECT CONTROL
with USB
MHL enabled
device
%
Switch the receiver into standby then use the MHL cable to connect your MHL enabled
device to the MHL terminal on the front panel of this receiver.
! To automatically switch to the MHL input when an MHL-compatible device is connected, see
page
89.
! The MHL-compatible device is recharged whenever it is connected to this unit. (Recharging is enabled only
when the unit's power is turned on.)
! For instructions on playing the MHL-compatible device, see
AUTO/ALC/
DIRECT
ECO
BAND
TUNER EDIT
HDMI 5 INPUT/
5V
2.1 A
MHL ( 5V
0.9 A )
USB mass
storage device
Playing a USB device
on
page
45.
AUTO/ALC/
DIRECT
ECO
BAND
TUNER EDIT
HDMI 5 INPUT/
5V
2.1 A
MHL ( 5V
0.9 A )
MHL cable
MHL Setup
Playing an MHL-compatible device
Connecting an HDMI-equipped component to the front panel
input
Connecting to a wireless LAN
Wireless connection to the network is possible through a wireless LAN connection. Use the separately sold
AS-WL300 for connection.
! Use only the furnished accessory connecting cable.
! Certain settings are required to use a wireless LAN converter (AS-WL300). For instructions on making these
settings, see the operating instructions included with the wireless LAN converter (AS-WL300).
( OUTPUT 5 V
0.6 A MAX )
LAN
(10/100)
for WIRELESS LAN
DC 5V
Ethernet
Wireless LAN converter (AS-WL300)
on
on
page
46.
35
Connecting your equipment
iPod iPhone iPad
AUTO/ALC/
DIRECT CONTROL
DIRECT
ECO
BAND
TUNER EDIT
HDMI 5 INPUT/
with USB
5V
2.1 A
MHL ( 5V
0.9 A )
Video camera (etc.)
(OUTPUT 5 V
0.6 A MAX)
DC OUTPUT
LAN
(10/100)
for WIRELESS LAN
DC OUTPUT
Modem
Router
WAN
WPS
Internet