Maytag MGT8885XS01 Use & Care Manual page 10

Gas double oven range
Table of Contents

Advertisement

Available languages

Available languages

Sabbath
Mode
Sabbath Mode is used to configure the oven system so that
certain features and modes are disabled or defeatured.
By
enabling Sabbath Mode, the oven will conform to Star-K Jewish
Sabbath requirements.
The oven is factory preset with Sabbath Mode Off.
To Enable Sabbath mode (one time only):
1. Press SE-i-i-INGS eight times until "SABBATH" appears in the
upper text area.
2. Press the Temp/Time "+" pad to enable Sabbath Mode.
3. "ON Selected" will scroll twice in the text area. The oven is
now activated to be run in Sabbath Mode. To set Sabbath
Mode, see the "Automatic
Shutoff/Sabbath
Mode" section.
12-Hour
Auto Off
The oven control is set to automatically shut off the oven
12 hours after the oven turns on. This will not interfere with any
timed or delayed cook function.
To Cancel 12-Hour Auto Off:
1. Press SE-i-i-INGS nine times until "12 Hr AUTO_OFF" appears
in the upper text area and "ON. Press (+) for Off" scrolls twice
from right to left in the lower text area.
2. Press the Temp/Time "+" pad to turn off the 12-hour Auto Off
feature.
"OFR Press (+) for ON" will scroll twice from right to left in the
lower text area.
3. "OFF Selected" will scroll twice from right to left in the lower
text area. The feature has been turned off.
Language
The Language is factory preset to English but can be changed to
French.
To Change the Language to French:
1. Press SETTINGS 10 times until "LANGUAGE"
appears in the
upper text area and "ENGLISH. Press (+) for French" scrolls
twice from right to left in the lower text area.
2. Press the Temp/Time "+" pad to select French.
"FRENCH. Press (+) for English" will scroll, in French, twice
from right to left in the lower text area.
3. "FRENCH Selected" will scroll, in French, twice from right to
left in the lower text area.
4. The language displayed will now be French.
The oven provides accurate temperatures;
however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
Temperature adjustment applies to upper or lower ovens.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
ADJUSTMENT
°F
COOKS FOOD
(ADJUSTMENT
°C)
10°F (6°C)
...a little more
20°F (12°C)
...moderately more
30°F (17°C)
...much more
-10°F (-6°C)
...a little less
-20°F (-12°C)
...moderately less
-30°F (-17°C)
...much less
To Adjust Oven Temperature
Calibration:
1. Press SETTINGS 11 times until "TEMP CALIB" appears in the
upper text area and "UPPER CALIBRATE. Press (+) for Lower
calibrate or push START" scrolls twice from right to left in the
lower text area.
2. Press START to calibrate the upper oven. "UPPER Calibrate
selected" will scroll twice from right to left in the lower text
area. "UPPER Calib" is shown in the upper text area and
"Press (+) or (-) to set offset" scrolls twice from right to left in
the lower text area.
OR
Press "+" to calibrate the lower oven. "LOWER Calibrate
selected" scrolls twice in the lower text area. "LOWER Calib"
is shown in the upper text area and "Press (+) or (-) to set
offset" scrolls twice in the lower text area.
3. Press the Temp/Time "+" pad to increase or decrease the
temperature
in 5°F (3°C) increments. The adjustment can be
set between 30°F (17°C) and -30°F (-17°C).
4. Press START to set the adjustment and exit the Temperature
Calibration menu.
<
_>,*_
¢,, ¢
The control can be locked out to avoid unintended
use of the
oven.
The control cannot be locked if the oven is in use, or the oven
temperature is 400°F (205°C) or above.
The current time of day will remain in the display when the control
is locked.
To
1.
To
Lock Control:
Press and hold START for 3 seconds or until "CONTROL
LOCKED" appears in the display. "Control locked" scrolls
while the control is locking, then "LOCKED" is displayed.
"LOCKED"
remains lit in the display.
Unlock Control:
Press and hold START for 3 seconds or until "Press and hold
START" scrolls in the display.
"UNLOCKING"
appears in the display while the control is
unlocking. The time of day appears and remains in the
display.
Page 10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents