Unpacking And Removing Shipping Bolts - LG WM0642H User's Manual & Installation Instructions

Hide thumbs Also See for WM0642H:
Table of Contents

Advertisement

Available languages

Available languages

INSTAllATiON INSTRUCTIONS
UNPACKING AND REMOVING
SHIPPING BOLTS
when removing the washer from the carton
base, be sure to remove the foam tub support
in the middle of the carton base.
If you must lay the washer down to remove the
base packaging materials, always lay it carefully
on its side. Do NOT lay the washer on its front
or back.
IMPORTANT: To prevent internal damage
during transport, the washer is equipped with
4 shipping bolts and plastic retainers. These
bolts and retainers MUST be removed before
operating the washer.
• Failure to remove shipping bolts and retainers
may cause severe vibration and noise, which can
lead to permanent damage to the washer. The
cord is secured to the back of the washer with
a shipping bolt to help prevent operation with
shipping bolts in place.
Foam Tub
Carton Base
Support
Shipping
Bolts
Starting with the bottom 2 shipping bolts,
use the included wrench to remove the
4 shipping bolts by turning them
counterclockwise.
Hole Cap
]
,%
Remove the retainers by turning them slightly
while pulling. Rotate and press the hole caps
into the shipping bolt holes.
NOTE: Save the bolts and retainers for
future use. To prevent damage to internal
components,
the shipping bolts and
retainers must be installed when
transporting
the washer.
11

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents