Download Print this page

KitchenAid KUDS24SE Use & Care Manual page 7

Undercounter dishwasher
Hide thumbs Also See for KUDS24SE:

Advertisement

Available languages

Available languages

Using your new KITCHENAID*
dishwasher
is simple.
Follow the steps below to get
started.
For more information
on specific steps and additional
safety information,
see
the page(s)
next to the step you would like to know more about.
NOTE:
Before using your dishwasher,
remove
all hang tags, temporary
labels, and pack-
aging materials.
Please also read the entire Use and Care Guide as it contains
important
operating
and safety information.
1. Load the dishwasher. See pages 8-13.
5. Push door firmly when closing.
2. Spin the upper spray arm. It should turn
_
_
1
freely check thespray
_,
lower
arm
also to make sure
it turns freely.
6. Run hot water at sink nearest dishwasher
until water is hot. Turn
off water. See page 23.
3. Add detergent. See pages 15-17.
7. Press the desired Wash Selection pad.
See the "Cycle
selection chart" on
page 19. Then press
the desired Option
pad(s). See page 20
for "Option selections."
4. Add rinse agent if needed. See page 18.
8. Press the Start pad. The cycle will begin
(if Delay Hours has
not been selected).
NOTE: The dishwasher
remembers the last
cycle and option(s) that
were completed. You
only have to press the
Start pad if you want to
use the same cycle and
option(s). However, if the last cycle you
completed was Rinse Only, the dishwasher
will run the Normal cycle if you press the
Start pad.

Advertisement

loading

This manual is also suitable for:

Kudc24seSculpturaArchitect