KitchenAid KDRP407HSS2 Use And Care Manual page 31

PROBLEM POSSIBLE CAUSE WHAT TO DO
Burners spark
The surface
burner controls
will not turn
It is normal for all four
burners to spark when a
burner is turned on, but has
not yet ignited.
Continuous sparking may be
caused when:
--There is a faulty spark
module.
--The wall outlet wiring is
incorrect.
No action is needed. Burner
operation is not affected and the
sparking should end when the knob
is moved from LITE.
Contact service technician to replace
module.
Contact a qualified electrician to
correct wiring, if needed.
You are not pushing in
before turning.
Push control knob(s)in before
turning to a setting.
Cooling fan runs
during BAKE,
CONVECT
BAKE, CON-
VECT ROAST,
BROIL, CON-
VECT BROIL or
CLEAN
It is normal for the fan to
automatically run while the
oven is in use to cool the
electronic control.
The convection
fan does not
run all the time
The Self-
Cleaning cycle
will not operate
Odor from oven
It is normal for the
convection fan to shut off
when the door is opened.
You have programmed a
delayed start time.
An "F" code appears on the
display.
Heating of insulation.
No action is needed.
Wait for the start time to be reached,
or cancel and reset the control.
Call a service technician to repair.
Odors are normal when the range is
new. The odors will disappear as the
oven is used.
continued on next page
31