KitchenAid KDRP407HSS2 Use And Care Manual page 26

sing and Caring for Your Oven
Cleaning Stainless Steel Surfaces
• Do not use steel wool or soap-filled scouring pads.
• Rub in the direction of the grain line to avoid marring the surface.
• Always wipe dry to avoid water marks.
• KitchenAid
TM
Professional Formula Stainless Steel Cleaner & Polish is the cleaner
recommended for cleaning stainless steel surfaces on this product. To order, call our
Factory Parts and Accessories Center at 1-800-442-9991, or order on-line at
www.applianceaccessories.com and ask for part number 8171420.
• If commercial cleaners are used, follow label directions. If product contains chlorine
(bleach), rinse thoroughly and dry with a soft, lint-free cloth. Chlorine is a corrosive
substance.
CLEANING AGENT HOW TO USE
Routine cleaning Liquid detergent soap and Wipe with damp cloth or sponge,
and fingerprints water, all-purpose cleaner then rinse with clean water and
wipe dry.
Stubborn stains
and baked-on
residue
Mild abrasive cleanser or
stainless steel cleaners
Rub in the direction of grain lines
with a damp cloth or sponge and
cleaner. Rinse thoroughly.
Repeat if necessary.
Hard water spots Vinegar Swab or wipe with cloth. Rinse
with water and dry.
;::! :;::
The oven lights will come on when you open
the oven door or when any function (other
than CLEAN and PROOF) is selected.
NOTES:
• Make sure the oven is cool before
replacing the light bulb.
• The oven lights will not work during the
Self-Cleaning or Proof cycles.
Replacing the oven light:
1. Unplug oven or disconnect power.
2. Remove glass light cover by grasping the
front edge of cover and pulling it away
from the side wall of the oven.
3. Remove the light bulb from its socket.
Replace the bulb with another halogen
bulb (12 volt, 5 watt maximum, available
at most hardware stores).
4. Replace the light cover by snapping it
back into wall.
5. Plug in oven or reconnect power.
26