Advertisement
Available languages
Available languages
1.
Adjust the width of the flue mounting
bracket
assembly
to equal the inside width of decorative flue.
Insert and tighten mounting
screws (3,9 x 6 ram) to
hold bracket width.
FLUE
MOUNTmNG
BRACKET
MOUNTING
SCREWS
(3,gx6mm)
2. Use mounting
screws (4,8 x 38 ram) and wall
anchors
to secure flue mounting bracket assembly to
the ceiling as shown.
MOUNTING
SCREWS
3. Measure the distance from the top of the hood outlet
to the ceiling - and add 6 inches.
4. Cut a piece of 5" round flexible metallic duct (not
included) to the length determined in Step 3. Attach
flange to bottom of flexible duct and secure with duct
tape.
5. Attach top of flexible duct to air baffle and secure with
duct tape.
6. Connect the flange to the hood outlet.
7. Turn upper flue section upside down so air vents
are at the top. Slide upper flue section into lower flue
section.
8. Set flue assembly on hood, with top tilted away from
walt. Align (4) holes in baffle with (4) holes in top flue
section.
9. Attach baffle to upper flue section with (4) screws (3,4
x 15 mm Flat Head)(included). Use a short
screwdriver.
10. Extend the upper flue section to the ceiling and
secure to upper bracket with (2) mounting screws (3,9
x 9,5 mm).
FLUE MOUNTmNG BRACKET _
AIR BAFFLE
/
DUCT TAPE
5"
ROUND
FLEXIBLE
METAL DUCT
DUCT TAPE
FLANGE
HOOD OUTLET
_
MEASURE
&
ADD 6 INCHES
FLUE
SECTmON
LOWER
--
FLUE
SECTION
10
Advertisement
