NEC Storage ReplicationControl SQL Option User Manual page 40

Chapter 4 Functions of NEC Storage ReplicationControl SQL Option
The iSMsql_snapshotrst command is used to output messages to databases on which snapshot
restorations are performed when the snapshot restoration operation starts and ends as well as when the
restoration operation starts and ends.
Start message
SnapshotRestore Start
DataBase db_name
MV:physical-disk-no
RV:physical-disk-no
End message
SnapshotRestore Normal End
DataBase db_name
MV:physical-disk-no
RV:physical-disk-no
Restore start message
Restore
Restore end message
Restore
Description of message
YYYY/MM/DD hh:mm:ss Start/end time (yyyy-mm-dd hh:mm:ss)
physical-disk-no
Path
Volume_name
ld_name
type
db_name
Executing message
Restoring.....
Only when "-wait" is specified is this output until restoration is completed. "," is updated
dynamically.
SnapshotRestore
MV:physical-disk-no
Volume_name
Path
Volume_name
Path
Volume_name
Path
Volume_name
Path
Start
Normal End YYYY/MM/DD hh:mm:ss
PD number
Drive name / NTFS folder name
MountPoint volume name
LD name
OS Type
Database name
Start
Volume_name
Path
YYYY/MM/DD hh:mm:ss
ld_name type
ld_name type
YYYY/MM/DD hh:mm:ss
ld_name type
ld_name type
YYYY/MM/DD hh:mm:ss
YYYY/MM/DD hh:mm:ss
ld_name type
34