Connection Manager; Enhancements; Battery And Charger Information - Nokia 6210 Navigator User Manual

Talk — shown when you press and hold the call key and get the permission to
speak
Send a callback request
To send a callback request from Contacts, scroll to a contact, and select
Send callback request.

Connection manager

In the Connection manager, you can identify the status of data connections, view
details on the amount of data sent and received, and end unused connections.
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
Select > Settings
To view connection details, scroll to a connection, and select
To end a connection, scroll to the connection, and select
end all connections, select

18. Enhancements

Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.

19. Battery and charger information

Your device is powered by a rechargeable battery. The battery intended for use with this
device is BL-5F. This device is intended for use when supplied with power from the following
chargers: AC-4, AC-5, AC-6, AC-8 or DC-4 chargers. The battery can be charged and
discharged hundreds of times, but it will eventually wear out. When the talk and standby
times are noticeably shorter than normal, replace the battery. Use only Nokia approved
batteries, and recharge your battery only with Nokia approved chargers designated for this
device. Use of an unapproved battery or charger may present a risk of fire, explosion,
leakage, or other hazard.
If a battery is being used for the first time or if the battery has not been used for a prolonged
period, it may be necessary to connect the charger, then disconnect and reconnect it to
E n h a n c e m e n t s
> Connectivity >
Options >
Conn. mgr..
Disconnect all.
Options
Options > Details.
Options > Disconnect. To
>
73