Troubleshooting - Philips DVP2880 User Manual

Hide thumbs Also See for DVP2880:
Table of Contents

Advertisement

HDMI output
Sampling frequency:
MP3: 22.05 kHz, 24 kHz, 32 kHz, 44.1
kHz 48 kHz
WMA: 44.1 kHz, 48 kHz
Constant bit rate:
MP3: 8 kbps - 320 kbps
WMA: 64 kbps - 192 kbps
Main unit
Dimensions (W x H x D):
270 x 37.5 x 209 (mm)
Net Weight: 1.0 kg
Power
Power supply rating: 110-240V~, 50-60Hz
Power consumption: 11W
Power consumption in standby mode: <
0.5W
Accessories supplied
Remote control and one battey
AV cables
User manual
Laser specification
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
Wave length: 658 nm (DVD), 790 nm
(CD)
Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
Beam divergence: 60 degrees
EN
14

6 Troubleshooting

To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. _____________________________
Serial No. _____________________________
No picture.
The TV video input channel is not correctly
selected (see the TV's user manual).
If you have changed a TV system setting,
switch back to the default setting: 1) Press
to open the disc compartment. 2) Press
SUBTITLE.
No picture on HDMI connection.
If this player is connected to an
unauthorized display device, the audio/
video signal cannot be output.
If the HDMI cable is faulty, replace it with a
new HDMI cable.
If you have changed the setting for HDMI
video resolution, switch to its default mode.
No sound output from the TV.
Make sure that the audio cables are
correctly connected between this player
and the TV.
No sound during DivX video playback.
The audio codes are not supported.
No sound on HDMI connection.
If the connected device is non-HDCP
compliant or only DVI-compatible, no
sound can be heard from the HDMI
output.
Make sure that [HDMI Audio] is set to
[On].

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp2881

Table of Contents