Download  Print this page

Install Remote Control Battery; Turn On; Set Clock - Philips CEM3100 User Manual

Hide thumbs

Advertisement

7
Reconnect the negative terminal of the car
battery.
Attach the front panel
1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel until the
mechanism locks it into place.

Install remote control battery

Caution
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For first-time use:
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
EN
10
3
Close the battery compartment.

Turn on

To turn on the unit,
• Press
.
To turn off the unit,
• press and hold
turned off.

Set clock

1
Press MENU repeatedly until current time
is flashed.
2
Rotate
to set hour.
3
Press
to confirm.
4
Rotate
to set minute.
5
Press
to confirm.
Set clock format
1
Press MENU.
2
repeatedly until [CLOCK
Press
or
FORMAT] is displayed.
3
Rotate
to select a setting:
• [CLOCK 12H]
• [CLOCK 24H]
until the unit is

Advertisement

Table of Contents

   Also See for Philips CEM3100

   Related Manuals for Philips CEM3100

This manual is also suitable for:

Cem3112Cem3100/12

Comments to this Manuals

Symbols: 0
Latest comments: