Philips CEM3100 User Manual page 11

• If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
• If the car battery is not disconnected,
to avoid short-circuit, ensure that the
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
3
Remove the mounting sleeve with the
supplied disassembly tools.
4
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
Note
•
If the unit is not fixed by sleeve but by the supplied
screws, skip this step.
1 8
3 m
5
Place the supplied rubber cushion over the
end of the mounting bolt.
6
Slide the unit into the dashboard until you
hear a click sound.
m
EN
9